ATV - Taotao, Coolster, Kayo

Air Box Filter Tao Bull 150 200 Targa Arrow 4Fun Tao Go Kart

Fits Tao Motor Bull 150 and 200 ATV. Tao GoKart Targa 150 and 200 Arrow 150 and 200 4Fun 150 and 200. Includes air filter and internal screen

Clutch Hellcat 125 DB17 ATD-125C Dirt Bike

Tao Motor OEM Clutch Assembly. 4 Speeds manual clutch 6 Spline Inner 18 tooth Inner 17 tooth on outer. Spline hole diameter: 17mm Basket Diameter: 116.5mm Basket Height: 39mm

Clutch Lever Assembly with Perch

Clutch lever perch assembly. Found on many Chinese made ATV and dirt bikes with 150, 200 and 250 motors. Rhino 250

7" Taotao Tao Motor Rim Wheel

Black Overall width: 12.6cm [5"] Overall diameter: 20.2cm [7.95"] Diameter without bead lip: 18cm [7"] Center hole diameter: 52mm [2.04"] Bolt hole spacing: 78mm [3"] center to center Bolt hole diameter: 8mm [.31"]

Iridium Spark Plug NGK for 110cc and 125cc motors CR7HIX

Replace C7HSA CR7HSA and many other plugs for the 49 - 125 horizontal motors found in most Chinese built ATVs, dirt bikes and pit bikes. As well as some 49cc and 150cc scooters.

Race CDI for some 150 200 and 250 units Rhino

Race CDI for round plug CDI. 4 plugs and 2 plugs. Does not fit square edge plugs.

Male petcock M10 1.25

Male threaded petcock M10 size with 102 thread pitch.

530 Gold Master Link

Master Link for our Gold Heavy Duty 530 Chain.

1500 RPM Clutch Springs for GY6 150 200 automatic motors Bull 150 200

Set of 3 clutch springs. Fits many different automatic gokart, ATVs and scooters.

Keihin Upgrade Tuneable Carburetor for 150 and 200 automatic motors GY6 Bull

Keihin name brand carb for GY6 style motors. Tuneable and used Keihin brand jets. Will require a 42mm or 1.5" air filter or stock air box.

Gas Cap Breather Vent Tube SSR Taotao Red

Breather cap for SSR dirt bikes and some Taotao ATVs. May fit Coolster and other brands as well.

Twist Throttle Conversion with limiter screw

This is an Upgrade Hi-Performance Twist Throttle Kit for your Chinese ATV or Dirt Bike. Fits many different brands and models with 49cc through 125cc "Honda Clone" style 4 stroke engines. Standard 22mm (7/8 inch.) handle bar mounting diameter. Kit...