GV250, GV125, Aquila

GV250 Rear Cylinder (February 2007 and later)

Hyosung OEM part. Verify manufacture date before ordering. #1 in picture. Special Order Item.

SSR189 Front Brake System Master Cylinder, Caliper and Line 2016 2017

#11 in picture. SSR says this only fits the 2016 and 2017 SR189 model.

GV250 Handle Bar (2010 +) Hyosung

Hyosung OEM Handlebar for GV250. 2010 and newer models only. #1 in picture. Special Order Item.

Hyosung Speedometer Sensor Pick Up

Hyosung OEM part for all digital speedometers. GD250R, GV250, GT250, GT250R, GT650, GT650R, ST7. #8 in picture. Special Order Item.

Left Side Switch GV250 Turn Signal, Horn, Hi-Low Beam 2005 2 2007 20008 2009

New Hyosung OEM part for 2005 2006 2007 2008 2009 GV250 and GV125.

Hyosung GV250 Front Intake Neck Boot 2005 2006 2007 2008 2009

Hyosung OEM part for 2005 2006 2007 2008 2009 and some 2004 models. #4 in picture. KM4MJ51A741206545 this VIN and newer. Once these are gone you will need to update both intake necks to the GT250R versions. 13110HJ8204 – PIPE, – 13120HJ8201

Hyosung electric fuel pump conversion kit for GV250 GV125

The original electrical fuel pump is replaced with the following vacuum operated fuel pump system that was standard on the 2005 -2009 models. (1) 15100HG5100 PUMP, Vacuum (1) 13120HJ8204 PIPE, Intake RR (1) 44910HG2600 STRAINER, Fuel (1) 15831HG2602...

GV250 GV125 Front Master Cylinder (1 inch older version)

Hyosung OEM Front Master Cylinder for many 2004 and earlier models with the 1 inch bars GV125 and GV250 models. #1 in picture.

GV250 Right Side Handle Switch Kill Start Carb Models (early Version)

Hyosung OEM part for 2003 and 2004, may also fit 2001 and 2002 GV250. May also fit the GV125. #1 in picture. Very low quantity available. Fits the 1" Handle bars. Special Order Item and very limited quantity available.

Exhaust Cam for GV250 GT250R and GT250 Front Rear

Hyosung OEM part for all years GV250, GT250R and GT250 front and rear cylinders. #17 in picture. Special Order Item.

Intake Cam for GV250 GT250R GT250

Hyosung OEM original part. Fits Front cylinder on all GV250, GT250R and GT250 as well as rear cylinder on GV250. #18 in picture. Special Order Item.

GV250 Rear Intake Boot Pipe with port

*** When out of stock we have the neck without the port. (13120HJ8201) You can T off from the other neck if needed *** Hyosung OEM rear intake neck for GV250. This is the updated neck with a vacuum port. #4 in picture.