Tools

Motion Pro Rotor and Sprocket Holder

Keeps flywheels, rotors and sprockets from rotating during removal and installation Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm Features 5 and 9mm pins Adjustable stop-screw keeps...

Motion Pro Master Link Pliers Clip

Designed to simplify installation and removal of clip-type master links One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip

Motion Pro Snap Ring Pliers

Economical pliers that easily work with both inside and outside opening snap rings or clips Includes 3 extra sets of tips, 1 additional straight tip and 2 offset angled tips

Pincers O Clip

Used to install O-clips PVC coated grip Clips in picture not included

49mm Dual Chamber Fork Cap Wrench Motion Pro

49 mm, 8 point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamaha's & Honda's (2010 Honda CRF250R uses 08-0236 Fork cap wrench) 12 mm slot for holding the damper rod for removing the...

50mm WP Dual Chamber Fork Cap Wrench Motion Pro

50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM's 12 mm slot for holding the damper rod for removing the rebound bolt.  This allows for the removal...

Fork Seal Bullet 48mm Orange Motion Pro

Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Fitment size is marked on each bullet for easy identification

Vacuum Adapter, Brass with Cap 6mm x P1.0mm (Ea) Motion Pro

Can be permanently installed on motorcycles that only have a plug in the vacuum port Eliminates the need to install adapters before every carburetor synchronization Rubber caps are included to seal vacuum

Wheel Weights, Nickel Plated Finish Motion Pro

Shiny nickel plated finish is perfect for chrome wheels Made from steel, lead free Adhesive backed steel wheel weights 72 1/4oz (7g) segments 6 strips with 12 segments per strip Adhesive will work on spoked or cast wheels Ideal size for motorcycle use...

Flywheel Puller Bombardier DS650 M38X1.5 R.H. Internal Thread - P420976235

Flywheel Puller for Bombardier/Can-Am DS 650 00-07 Replaces OEM P420976235 Thread 38mm x 1.5 R.H. I.T.

Motion Pro Needle for Filler Guage 08-0075

For use with Motion Pro shock filler only.  N2 Filler 22 Ga. X 1 In.

Motion Pro Inline Fuel Valve, Fits 5/16" Fuel Line

The Motion Pro Inline Fuel Valves are ideal for use on ATVs or other vehicles where an inline fuel petcock is necessary 12-0035 & 12-0036 are not recommended for engines over 300cc