Dirt Bike - Pit Bike SSR, Kayo, Thumpstar, Apollo

Lazer 5 Inner Tube IRC Heavy Duty 70/100-17 2.25 2.5 2.75 17

High quality Japanese tubes meet or exceed OEM quality standards. 3mm thick and puncture resistant. Made of a blend of natural and butyl rubber.

Chain Roller 8mm

Roller width 33.9mm [1.335"] OD of lip of roller at widest part 36.35mm [1.43"] Center area of roller OD 23.25mm [.915"] Bearing size/number 608ZZ 8X22X7 ID of bearing 8MM

NGK Spark Plug -SR189 SR150 150 189 SSR

Sold individually. NGK Spark Plugs are made in Japan. Fits all years SSR SR150 and SR189.

Iridium Spark Plug NGK for 110cc and 125cc motors CR7HIX CR7HSA C7HSA

Replace C7HSA CR7HSA and many other plugs for the 49 - 125 horizontal motors found in most Chinese built ATVs, dirt bikes and pit bikes. As well as some 49cc and 150cc scooters.

SSR SR250S Intake Boot Insulator Connector (updated)

SSR OEM Original Part. #16 in picture. Does not fit the Dellorto carb! Fits the newer SWR PHBE34 carb only. 48mm long with a 39.5mm inside diameter.

Front Brake Lever SR150 SR189 SR125TR SR110TR

Brake lever for the "Black" front master cylinder for the SR150 SR189 and SR110TR SR125 TR models. Does not fit the base model SR units or the "Silver" master cylinders.

Race CDI for some 150 200 and 250 units Rhino

Race CDI for round plug CDI. 4 plugs and 2 plugs. Does not fit square edge plugs.

Male petcock M10 1.25

Male threaded petcock M10 size with 102 thread pitch.

SSR SX50 SX50-A left brake handle lever assembly

SSR OEM part. #2 in picture.

Taotao Tao Motor Coolster Flywheel Puller 3 in 1 Kayo K2 230

M27 x 1.0 LH threaded male M28 x 1.00 female M16 x 1.5 RH Male impact

Modified Retainer Clip and Hardware for 428 20mm Sprocket

This is the custom hardware and retainer clip for use with the 428 12 tooth sprockets found on the larger vertical motors 150cc, 197cc, 200cc 230cc and 250cc with the 20mm sprockets. We have used smaller hardware and then ground down the hardware and...

Hawk TBR7 250 Rear Sprocket (34 to 56 tooth) 428

Not made in China. Made from High Carbon Steel SAE 1045/49/SCM415. Fits 428 Chain. Has 2 different 4 bolt mounting hole sets, 8mm and 10mm. May fit other Chinese made 250 Dual Sports. See picture for exact specs. Check your current tooth count...